Isuzu E-IDSS Engineering Release 2021 - Isuzu Diagnostic Service System Support Nexiq connect

Isuzu E-IDSS Engineering Release 2021 - Isuzu Diagnostic Service System Support Nexiq connect

Brand: Isuzu
Product Code: Isuzu E-IDSS 2019
Availability: In Stock
$200.00
Ex Tax: $200.00

Isuzu E-IDSS Engineering Release 2021 - Isuzu Diagnostic Service System Support Nexiq connect

 

Remote installation by teamviewer

 

 

E-IDSS Engineering Release is designed to support Isuzu Engines. With each new release of the E-IDSS program, additional vehicle engine configurations and controller systems may be supported. IDSS is designed to support Isuzu Motors. Engine configurations and controller systems will be supported for future engines.

 

E-IDSS exclusive software for Isuzu Industrial engines
DENYO 2005-2015 (4JJ1 Tier-4, 4HK1 Tier-4, 6WG1 Tier-4, 4LE2 Tier-4, 6WG1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)
Doosan 2005-2010 (6WG1 Tier-3, 6UZ1 INT-Tier-4, 6WG1 INT-Tier-4)
Hidromek 2005-2012 (4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
Hitachi 2005-2015 (4JJ1 Tier-4, 4HK1 GB3, 6HK1 GB3, 6UZ1 GB3, 6WG1 GB3, 4JJ1 GB3, 4HK1 tier-4, 6HK1 tier-4, 6UZ1 tier-4, 6WG1 tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 6UZ1 INT-Tier-4, 6WG1 INT-Tier-4, 4JJ Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)
Hokuetsu 2005-2014 (4LE2 Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
HSC 2005-2010 (6HK1 INT-Tier-4, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)
IHI 2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
ISEKI 2006-2012 (4JJ1 INT-Tier-4, 4JJ1 Tier-3)
Isuzu PT-China 2005-2015 (6WG1 GB3, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
Isuzu America 2005-2013 (4JJ1 Tier-4, 4LE1 Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)
IWAFUJI 2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3)
JCB HP 2005-2010 (6HK1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
KATO 2006-2013 (4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3)
KCM 2005-2014 (6WG1 Tier-4, 6WG1 INT-Tier-4, 4HK1 Tier-3)
KG Flowtechno 2005 (4HK1 Tier-3)
Kobelko 2013 (4LE2 Tier-4)
Madill 2005 (6HK1 Tier-3)
Maeda Seisakusho 2013 (4LE2 Tier-4)
Morooka 2010 (4HK1 INT-Tier-4)
NH Kobelco 2005 (6HK1 Tier-3)
Nihon Josetsu 2005-2013 (4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3)
Nihon Sharyou 2005-2006 (4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)
Sakai 2005-2012 (4JJ1 INT-Tier-4, 4JJ1 tier-3, 4HK1 Tier-3)
Sanward 2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3)
Sany 2005-2014 (6WG1 GB3, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3)
Shinko Engineering 2005 (4HK1 Tier-3, 6HK1 Tier-3)
Sumitomo 2005-2015 (4JJ1 Tier-4, 4HK1 GB3, 6HK1 GB3, 4HK1 Tier-4, 4JJ1 GB3, 6HK1 Tier-4, 4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 6UZ1 INT-Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)
Takeuchi 2006-2013 (4JJ1 Tier-4, 4JJ1 INT-Tier-4, 4JJ1 Tier-3)
Unicarriers 2005-2010 (4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4HK1 Tier-3, 6HK1 Tier-3)
Uotani 2005 (4HK1 Tier 3)
Yamabiko 2005 (4HK1 Tier-3, 6HK1 Tier-3)

How To Use The IDSS main screen will be displayed at the start of every Isuzu Diagnostic Service System (IDSS) session. The main screen consists of the following:

Select OEM, Model Year, Engine Model and Engine Type drop down menus
Enter Engine Serial Number window
Internet Updater button
Recent Engines Loaded window
Recent Service Bulletins window

From the main screen, the user can perform the following:

Manually select the engine model, etc . through a series of drop-down menu boxes click Load Engine.
Manually enter the Engine Serial Number or click Find Engine button.
Automatically read the Engine Serial Number by clicking the Request Serial Number button.
Click one of the 30 most Recent Service Bulletins listed.
Click one of the listed Recent Engines Loaded selections.

 

Sample for Engine 6WG1 (INT-Tier 4)

DTC P0123 (Flash Code 43) Throttle Position Sensor Circuit High
1. P0123 Priority DTC
DTC P1655
2.P0123 Diagnostics
1. Turn OFF the ignition switch.
2. Disconnect the harness connector of the intake throttle valve.
3. Check the intake throttle position sensor data display with the trouble diagnosis scan tool.
values : 0.1 V
4. When the value is at or above the standard value, inspect the signal circuit between the ECM and the intake throttle valve.
Note: There should be no short circuit to the battery or the ignition power source circuit between the ECM and the intake throttle valve.
Note: There should be no short circuit to the 5 V power source circuit between the ECM and the intake throttle valve.
5. If a problem is discovered, repair the signal circuit.
6. Inspect the intake throttle valve harness connector for a contact failure.
7. If a problem is discovered, repair the harness connector.
8. If the harness connector is normal, replace the intake throttle valve.
Refer to 1B Mechanical(6WG1) [intake throttle valve removal] Reference
Refer to 1B Mechanical(6WG1) [intake throttle valve installation] Reference
9. Inspect whether there is an open circuit or high resistance in the GND circuit between the ECM and the intake throttle valve.
10. If a problem is discovered, repair the GND circuit.
11. Turn OFF the ignition switch.
12. Disconnect the ECM harness connector.
13. Inspect the ECM harness connector for a contact failure.
14. If a problem is discovered, repair the harness connector.
15. Replace the ECM.
Refer to 1J Electrical(6WG1) [ECM removal] Reference
Refer to 1J Electrical(6WG1) [ECM installation] Reference
16. Set the injector ID code on the ECM.
3.P0123 Confirm Resolution
1. Clear the DTC using the trouble diagnosis scan tool.
2. Turn OFF the ignition switch for at least 30 seconds.
3. Start the engine.
4. Perform a test-run.
5. Use the trouble diagnosis scan tool to confirm that a DTC has not been detected.

 

Contact Information:

 

email :ljh123owns@gmail.com

skype : ljh123owns

 

If you have any problem, please do not hesitate to contact us.

Shipment Note:

If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

 

Skype Me!Skype Me

 

Return Policies:

If you are not satisfied with your purchase .please contact us quickly, we can exchange one to you,but  buyers is responsible for the returning shiping cost .
If you have any item proplem, just email us quickly, we will do our best to slove it in 24 hours. thank you!
If you want more items we can give you a little discout,thank you!
 
About the customs problems and Tax: 
1. we have professional shipping company and there is no any failed customs experience before. (We have special method to send out together those stickers to avoid customs problems)
2. We always declare below USD$100 to save tax. Please leave us message if you have special requests for the declared value.
 
Notice:
1. If you are from Brazil, you must provide your CPF NUMBER (TAX NUMBER) to us.
 
2.If you are from Russia,pls choose the shippment by HK air mail/EMS.
3. If your address is remote area, we will write to ask your decision before sending goods.
 
4.If your address is the remote place by DHL/UPS/TNT,please add more 35.0usd(extra remote fee). If do not,please cancel the order, Thanks.
 
 
Contact Us:
Our office hours are :
24hours 7 days online service
      And if nobody answer you online in time sometimes,do not worry.leave us a message or write down your desires,we will contact you as soon as possible
 
Hope we can do more business in the further!
Looking forward cooperation with you in the future!Waiting for your new order!

Write a review

Note: HTML is not translated!
Bad           Good